The FN FNC: Affordable Select-Fire 5.56
In the world of fully automatic rifles here in the States, there is no question that the M16 reigns supreme. If you are fortunate enough to possess a legally registered M16 lower receiver the world is your oyster; You essentially have a full auto tinker toy that you can configure into any caliber or configuration that your heart desires, and parts are cheap and readily available. The downside is that an M16 these days on average will cost the buyer around $20,000 (which could put one heck of a dent in your mortgage). However, all hope is not lost for a buyer looking for a great 5.56 rifle that you can rock and roll with at the range; The FN FNC is a great entry level machine gun that costs less than half of what you can buy an M16 for these days.
video
The FN FNC was designed in the 70′s by, well, you guessed it, FN Herstal of Belgium. It replaced the more expensive FN CAL rifle and became the standard service rifle of Belgium in the late 80′s. It is still in service within the armed forces of Belgium, and licensed copies of the rifle are in service in Sweden as the AK5, and Indonesia as the Pindad SS1. It is said that approximately 6,000 FN FNC rifles were imported into the USA in the 80′s, and for the price of about $750 you could buy yourself a new one. Some of these guns were converted to selective fire by registering the receivers, but S&H Arms conversions via the installation of a registered auto sear are the most common. One funny thing about the FNC sears is that there are in fact more registered auto sears in the USA than there are FNC Rifles! Anyways, you can buy a semi automatic FNC for about $3,000 and a sear for about the same price, so for about $6500 you can have a legal fun switch on a great little rifle. This quick write up is more or less to supplement a weekly gun glamor segment I would like to start. Enjoy these photos of my FNC rifles, and please do not hesitate to ask any questions. I would be more than happy to answer them to the best of my ability!
video
And here is a tiny piece of metal that will cost you a pretty penny! This is one of two sears I have purchased that is pending transfer to me at my SOT. I find it comical that the dealer taped the sear to the approved Form 3, and that they found a new way to spell “machine gun”.